High Resolution 3D Printers for Professionals | NOVA3D

Due to the different properties of the different resins, the light intensity and time requirements for the post curing of the models which printed with the different resins will be different. Before the post curing of the resin model using this curing box, please fully understand the characteristics of the post curing of the resin used in the model, so as to set the curing time. The best curing time is to cure the model until its surface is dry and cool. If you are using Nova resin, please refer to the curing time in the table below.



固化时间表.jpg


Tips: due to the strong light intensity of the curing box, the curing time of the model printed by other resins should not be too long, in addition to the resin that needs special treatment at the later stage, such as the casting resin.  In order to avoid the excessive exposure to affect the properties of the resin!

0 People comment

Comments
  • E-mail addresses will not be disclosed code