High Resolution 3D Printers for Professionals | NOVA3D

3D Printers are precision machines. In order to ensure safety, they should be operated carefully. All safety precautions must be followed.

It can help you print a variety of beautiful models by correct operation of the printer . As with any professional equipment, it must be carefully to operate printers, materials and accessories to ensure a safe working environment and prolong the service life of printer. 

The 3D printer is an educational tool. It can help supervise the young, inexperienced users to ensure pleasant and safe operation.

Please do not modified
Please use the original accessories for the printer.  The Manufacturer takes no responsibility for  any modification  without the manufacturer's approval and instructions. At the same time, unauthorized modification may also damage the machine and cause harm to your body.

UV Light


Be careful when using lasers.

This  printer is  belong to category I ultraviolet laser product. Acceptable radiation is within the category I   limiting value. There is  laser  in the equipment, please avoid directly  touch  UV light.

The resin

NOVA3D resin is belong to  chemical. When you use it, please follow the standard chemical safety procedures and NOVA3D resin operating instructions.  You must protect your skin when using the printer by wearing safety gloves.



Alcohol is a flammable chemical.

Please carefully refer to the safety instructions for purchased alcohol. Alcohol is flammable and explosive , so keep it away from heat source, sources of fire or sparks. Containers with alcohol should be tightly closed or covered when not in use. When using alcohol, please wear safety gloves and provide proper ventilation in the  room.

NOVA3D manufacturer does not produce alcohol. Please contact with chemical manufacturer or supplier for more detailed information on safety.

Sharp Tools

The Starter Kit contains sharp tools such as a spatula, washing tool and withdrawal tool.These tools may bounce when used on a smooth surface (such as the platform with a resin coating.)

radio jamming

According to CFR item 47 of the Part 15 of the FCC rules, the test results indicate that this device complies with the restrictions for class B digital devices.These restrictions are intended to provide reasonable protection against harmful interference while its operation in a commercial environment. The printer generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the following User Guide, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause harmful interference, in which case the user will be required to eliminate the interference at his own expense.

0 People comment

  • E-mail addresses will not be disclosed code